FYP: Working out Modules

Here's a little list of how I expect some of the modules to work:

Master controller:
Phone/Webapp -> PHP POST -> SQLdb entry


Master receiver:
Network capable Arduino/Pi sends several requests to the web DB per second.  


  • Lights
    • RGB bulb/strip along ceiling/wall join
    • 4 pin input -> Arduino -> Wireless transimtter  (RasPI?/Wifi Sheild) -> Phone
  • Sound
    • Servo hooked up to volume knob
    • 4 pin input -> Arduino -> Wireless transimtter  (RasPI?/Wifi Sheild) -> Phone
  • Food
    • Fridge
      • Weight sensors under products to detect quantity and presence. Notification  when supplies are runing low
    • Cooking
      • Grill turns on at schedueled/dictated times.
      • Leave food in grill in the morning
  • Movement
    • motion dectors
    • door open /closed  sensors
  • Security
    • IP cameras - this will also help with keeping an eye on plants/oven/other time sensitive applications.

Comments

  1. Unknown4 April 2022 at 04:53

    KING CASINO, LLC GIVES A $100 FREE BET
    KING CASINO, 1xbet app LLC GIVES A $100 FREE BET to try. Visit us https://septcasino.com/review/merit-casino/ today and receive a $100 FREE BET! Sign up poormansguidetocasinogambling at our herzamanindir.com/ new site!

    ReplyDelete

Post a Comment

Popular posts from this blog

Logitech G502 Proteus Core Teardown & Scroll Wheel Replacement

Image
So I recently acquired a Logitech  G502  mouse, and I have to say I absolutely love it. It's a beautiful mouse, and a worth upgrade to my old G500s mouse. However my one gripe was the new all-metal scroll wheel. While the weight was nice, I missed the rubber ring around my old 500s. This led me to attempt to replace the new 502 scroll wheel with the old one from my busted 500s. So let's get started shall we? So as you can see, these are what the mice look like side-by side. While they look drastically different, the ergonomics are actually very similar among the two. The first step was to take the mouse feet off and unscrew the screws that hold the chassis in place.  Lever the feet off gently with a flathead screwdriver. And they just peel right off. There's four screws on the underside of the mouse.  So the feet are layered. There's double-sided adhesive foam, with the feet on top. On the back foot, I managed to peel off th
Read more

Turning a laptop screen into an external monitor.

Image
So my old Dell L502x died. However most of the components were fine, it's just the motherboard that seemed to be down with a case of water damage. So along with turning the chassis of the laptop into a dock/stand for my new laptop I wanted to turn the laptop's screen into an external monitor. So the first thing I did was extract the panel from the housing to take a look at the model number and the interface. If you're looking to do this yourself just look up the documentation for your laptop or go to ifixit.com  and look it up. Fortunately Dell has excellent documentation and a pretty straightforward teardown process.
Read more